One of the most important milestones in the construction of our power generator was the so-called wedding between generator and trailer. We spent a lot of time thinking about what we can do and what we need to do to achieve a secure and stable connection between the two parts.
To firmly weld the unit to the frame of the trailer was out of the question. Because of the heat during welding, the material changes the trailer. We probably would not have received a certificate from TÜV for such a connection. So we had to think of something else. With the expert of the TÜV, we then agreed on a screw connection. The unit is screwed with threaded rods to a small subframe underneath the trailer and tightened.
Thus, the way was paved for the wedding.
The big day came when the unit was lifted onto the trailer.
_verpix.jpg "Click to enlarge image NAG_wird_auf_Anhaenger_gesetzt_(Heckansicht)_verpix.jpg")
.jpg "Click to enlarge image NAG_wird_auf_Anhaenger_gesetzt_(Seitenansicht).jpg")
In the same way we later also screwed the soundproofing with a trailer.